Common causes
- Failed thermistor
- Loose wiring
- Cold outside air entering through the vent (tE2)
- Severe vent restriction causing overheating
What you can check yourself
- Power reset: unplug, hold Start/Pause 5 seconds, plug back in
- tE2: clear snow/ice from the outside vent and run the empty dryer to warm it
Always unplug the appliance (and turn off gas or water if relevant) before checking anything inside it.
When to call a technician
Related guide
LG Dryer Not Heating — An LG dryer that tumbles but stays cold usually has a heating element, thermal fuse, power supply or gas ignition problem.…
Questions
What does tE1 mean on an LG dryer?
tE1 means: A temperature sensor in the dryer is reading out of range. tE2 often shows up in very cold conditions.
Can I fix the tE1 code myself?
Try these steps first: Power reset: unplug, hold Start/Pause 5 seconds, plug back in; tE2: clear snow/ice from the outside vent and run the empty dryer to warm it. If the code returns, the thermistor or its harness needs to be replaced.
How much does it cost to fix an LG tE1 error in Charlotte?
Our service call is $69.95 and is waived when you go ahead with the repair. Labor starts from $99.95 plus any parts; you get the exact price after diagnosis.
Other LG dryer codes
- d80 — Flow Sense Vent Restriction
- nP — No Power to Heater
- PS — Power Supply / Wiring Error
- dE — Door Error
- HS — Humidity Sensor Error
- gAS — No Gas Supply
- F0 — Filter, Drain or Water Supply Notice
- PF — Power Failure
Codes can vary by model. Summary based on LG's public support documentation and our repair experience. LG support page.