Symptoms
- Drum turns but no heat
- nP, PS or gAS code
- Takes multiple cycles to dry
- Heat on some cycles only
Most likely causes
Tripped breaker leg (electric)
Electric dryers need both halves of a 240V circuit. If one trips, the drum turns but there is no heat (nP).
Heating element / thermal fuse
Restricted venting overheats the dryer and can burn out the element or blow a safety fuse.
Gas valve coils or igniter (gas)
If the igniter glows but the flame does not stay lit, the valve coils are a common fix.
Thermistor (tE codes)
A failed temperature sensor can stop the heat.
Safe checks before you call
- Reset the dryer breaker
- Clean the lint filter and check the vent
- Make sure the gas valve is open
When to call a technician
LG Dryer Repair in Charlotte, NC and nearby
We do LG dryer repair in homes across Charlotte and the surrounding counties — Mecklenburg, Cabarrus, Union, Gaston and Iredell in North Carolina, and York and Lancaster in South Carolina. Our south Charlotte (Ballantyne) team covers Charlotte, Matthews, Mint Hill, Pineville, Indian Trail, Waxhaw, Monroe; our Uptown / north Charlotte team covers Huntersville, Cornelius, Davidson, Mooresville, Concord, Harrisburg, Kannapolis.
- LG Dryer Repair Charlotte
- LG Dryer Repair Huntersville
- LG Dryer Repair Cornelius
- LG Dryer Repair Davidson
- LG Dryer Repair Mooresville
- LG Dryer Repair Matthews
- LG Dryer Repair Mint Hill
- LG Dryer Repair Pineville
- LG Dryer Repair Concord
- LG Dryer Repair Harrisburg
- LG Dryer Repair Kannapolis
- LG Dryer Repair Indian Trail
- LG Dryer Repair Waxhaw
- LG Dryer Repair Monroe
- LG Dryer Repair Gastonia
- LG Dryer Repair Belmont
- LG Dryer Repair Mount Holly
- LG Dryer Repair Fort Mill
- LG Dryer Repair Indian Land
- LG Dryer Repair Tega Cay
- LG Dryer Repair Rock Hill
- LG Dryer Repair Lake Wylie
- LG Dryer Repair Lancaster
Recent LG repairs in the Charlotte area
| Month | City | LG model | Problem | What we did |
|---|---|---|---|---|
| 2026-11 | Waxhaw, NC | LG DLEX4000W | Dryer not heating; heavy lint buildup inside the cabinet | Replaced the heating element and cleaned lint from the cabinet, blower housing and heater duct Photos → |
Related LG error codes
nP— No Power to HeaterPS— Power Supply / Wiring ErrortE1 / tE2 / tE3 / tE4— Thermistor ErrorgAS / 9A5— No Gas Supply