Common causes
- Lint buildup in the exhaust duct
- Crushed or kinked foil duct behind the dryer
- Long vent run with many elbows
- Stuck or clogged outside vent flap
- On some gas models d80 can indicate no gas supply
What you can check yourself
- Clean the lint filter and the filter housing
- Pull the dryer out and straighten the duct
- Check that the outside flap opens fully when the dryer runs
- Use smaller loads until the vent is cleaned
Always unplug the appliance (and turn off gas or water if relevant) before checking anything inside it.
When to call a technician
Related guide
LG Dryer Not Drying — If loads need two or three cycles, the dryer is usually fighting a restricted vent — LG's Flow Sense d80/d90/d95 codes warn about this.…
Questions
What does d80 mean on an LG dryer?
d80 means: LG Flow Sense detected that exhaust airflow is restricted — the number is the approximate percent of blockage.
Can I fix the d80 code myself?
Try these steps first: Clean the lint filter and the filter housing; Pull the dryer out and straighten the duct; Check that the outside flap opens fully when the dryer runs; Use smaller loads until the vent is cleaned. d90 and d95 mean airflow is badly restricted — a fire risk. Have the full vent run cleaned. If the vent is clear and the code persists, a thermistor or blower issue needs checking.
How much does it cost to fix an LG d80 error in Charlotte?
Our service call is $69.95 and is waived when you go ahead with the repair. Labor starts from $99.95 plus any parts; you get the exact price after diagnosis.
Other LG dryer codes
- nP — No Power to Heater
- PS — Power Supply / Wiring Error
- dE — Door Error
- tE1 — Thermistor Error
- HS — Humidity Sensor Error
- gAS — No Gas Supply
- F0 — Filter, Drain or Water Supply Notice
- PF — Power Failure
Codes can vary by model. Summary based on LG's public support documentation and our repair experience. LG support page.