Common causes
- Too much detergent
- Non-HE detergent
- More than one pod per load
What you can check yourself
- Use only HE detergent at the recommended amount
- Use one pod per load, placed in the drum
- Run Tub Clean to remove residue
Always unplug the appliance (and turn off gas or water if relevant) before checking anything inside it.
When to call a technician
Related guide
LG Washer Not Draining — Water left in the drum and an OE code are the most common LG washer issues we fix. Most of the time it is a clog you can clear yourself.…
Questions
What does Sud mean on an LG washer?
Sud means: The washer detected excess suds and added extra rinsing — the cycle can take up to about 2 hours longer.
Can I fix the Sud code myself?
Try these steps first: Use only HE detergent at the recommended amount; Use one pod per load, placed in the drum; Run Tub Clean to remove residue. If Sud shows with normal detergent, the pressure sensor may be faulty.
How much does it cost to fix an LG Sud error in Charlotte?
Our service call is $69.95 and is waived when you go ahead with the repair. Labor starts from $99.95 plus any parts; you get the exact price after diagnosis.
Other LG washer codes
- OE — Drain Error
- IE — Water Inlet Error
- UE — Unbalanced Load
- LE — Locked Motor / Rotation Error
- dE — Door / Lid Lock Error
- CE — Motor Over-Current
- FE — Overfill Error
- PE — Water Level Sensor Error
Codes can vary by model. Summary based on LG's public support documentation and our repair experience. LG support page.