Common causes
- Water inlet valve stuck open
- Faulty water level (pressure) sensor
- Clogged pressure hose
- Siphoning from an incorrectly installed drain hose
What you can check yourself
- Unplug for 60 seconds
- Run a Quick cycle and watch whether it drains
Always unplug the appliance (and turn off gas or water if relevant) before checking anything inside it.
When to call a technician
Related guide
LG Washer Not Filling With Water — An IE code or a washer that sits silent after you press Start usually means a water supply problem.…
Questions
What does FE mean on an LG washer?
FE means: The washer detected more water than it should hold.
Can I fix the FE code myself?
Try these steps first: Unplug for 60 seconds; Run a Quick cycle and watch whether it drains. If the tub keeps filling with the washer off, shut off the water faucets right away — the inlet valve is stuck and must be replaced.
How much does it cost to fix an LG FE error in Charlotte?
Our service call is $69.95 and is waived when you go ahead with the repair. Labor starts from $99.95 plus any parts; you get the exact price after diagnosis.
Other LG washer codes
- OE — Drain Error
- IE — Water Inlet Error
- UE — Unbalanced Load
- LE — Locked Motor / Rotation Error
- dE — Door / Lid Lock Error
- CE — Motor Over-Current
- PE — Water Level Sensor Error
- tE — Heating / Temperature Sensor Error
Codes can vary by model. Summary based on LG's public support documentation and our repair experience. LG support page.