Common causes
- Compressor not running
- Door left open or bad seal
- Blocked air vents
- Plugged into a power strip
What you can check yourself
- Unplug 60 seconds and plug directly into a wall outlet
- Confirm the freezer is set to 0°F
- Check door seals with the paper test
Always unplug the appliance (and turn off gas or water if relevant) before checking anything inside it.
When to call a technician
Related guide
LG Refrigerator Not Cooling — An LG refrigerator that stops cooling is the most urgent call we get — food starts spoiling within hours. The good news: many cooling proble…
Questions
What does FU mean on an LG refrigerator?
FU means: The freezer did not reach or hold its target temperature in the expected time.
Can I fix the FU code myself?
Try these steps first: Unplug 60 seconds and plug directly into a wall outlet; Confirm the freezer is set to 0°F; Check door seals with the paper test. If the compressor is not running or the code continues, service is needed.
How much does it cost to fix an LG FU error in Charlotte?
Our service call is $69.95 and is waived when you go ahead with the repair. Labor starts from $99.95 plus any parts; you get the exact price after diagnosis.
Other LG refrigerator codes
- IF — Ice Maker Fan Error
- FF — Freezer Fan Error
- rF — Refrigerator Fan Error
- CF — Condenser Fan Error
- dH — Defrost Failure
- dS — Defrost Sensor Error
- FS — Freezer Sensor Error
- rS — Refrigerator Sensor Error
Codes can vary by model. Summary based on LG's public support documentation and our repair experience. LG support page.